If you're getting other quotes, ours lists the equipment by model so you can compare.
Sized to the house, not the old unit
An oversized system cools the house quickly, then shuts off before it removes the humidity, so the house feels cold and damp. An undersized system runs constantly on hot days and never catches up.
We size every system with a load calculation. It accounts for square footage, insulation, windows, which way the house faces, ceiling heights and how many people live there. A Cape in Warwick and a colonial in East Greenwich with the same square footage can need different equipment.
Central air
Paired with an existing furnace or a new air handler.
Ducted heat pumps
One system that cools in summer and heats in winter.
Ductless mini splits
For homes without ducts, additions and problem rooms. See heat pumps and mini splits.
Replacement systems
For older central air, including systems that still use R-22 refrigerant.
Thermostats and zoning
So different floors can be set to different temperatures.
Ductwork or ductless
If you have forced hot air, you already have ducts. Cooling needs more airflow than heat, so ducts sized only for heat sometimes need changes. We check duct size, leaks, returns and insulation in unheated spaces like attics.
If you heat with a boiler and radiators, you probably have no ducts. There are two ways to go.
Ductless mini splits
One outdoor unit can serve several indoor units. Installation is less disruptive, and each room is controlled separately.
New ductwork
Possible in many homes, often through the attic for the second floor. It costs more and takes longer, but some homeowners prefer small ceiling vents to wall units.
Before you decide, think about how long you plan to stay, whether you want to replace part of your heating at the same time, which rooms you rarely use, and whether noise matters near bedrooms or a patio.
What drives the price
We don't quote a price before seeing the house. The number moves with the system type, the size and number of zones, the efficiency of the equipment and any ductwork changes. Electrical work, like a new circuit or panel upgrade, adds to it, and so does removing the old equipment and recovering its refrigerant.
Higher efficiency costs more to buy and less to run, and the quote shows the difference. Some equipment qualifies for rebates. If we open a wall or attic and find a problem, how we work explains what happens.
Walkthrough to startup
Walk the house
Every floor, the attic, the basement, the ducts and the electrical panel.
Load calculation and estimate
A written estimate with options side by side, equipment listed by model.
Install day
We protect your floors, set the equipment and clean up.
Startup
We check charge and airflow, then show you the thermostat and filter.
Towns we cover most
We install cooling systems across Rhode Island, including West Warwick, Warwick, East Greenwich and Cranston. See all of our service areas.